Fishtank Systems

How to use it?

How To Use Jet Water Cleaning System
A. Routine maintenance (15 minutes)


Turn off all external appliances such as hung-on filter, water heater, etc
Start to siphon out water (use a siphon tube with a hand pump available at pet shops) from the tank bottom through the Water Draining Tube B
Flush tap water through the Water Flushing Tube A (connect a water hose) while siphoning out water. This action pushes debris toward the Tube B. Rotate the Tube A 90 degrees to wash the entire tank bottom.
Stop flushing tap water, and continue to drain water using the siphon action until the water level is 2/3 full.
Fill the tank with tap water through Tube A, and add tap water conditioner.
Turn on all exterior appliances

B. Total cleaning of whole tank (30-60 minutes)


Remove fish, but leave all ornaments and live plants.
Siphon out water completely (use a siphon tube with a hand pump available at pet shops) from the tank bottom through the Water Draining Tube B.
Flush tap water vigorously over gravel while siphoning out water.
Fill the tank with tap water.
Siphon out water again. (Repeat several times until drained water becomes clean)
Fill the tank with tap water, and then add tap water conditioner.
Turn on all appliances.

Join our Mailing List

Sign up to receive our email updates

Search our store